INSTRUCTIONS FOR USE// Follow the steps below to ensure that the design is well transferred onto the clay.


Before Baking:

1. Roll your conditioned clay onto a tile surface by using an acrylic roller.

2. Place the transfer paper with the colored/printed side on the clay slab.

3. Gently use your acrylic roller to adhere transfer paper to clay. Make sure there are no air bubbles or corners lifting.

4. Dissolve the Paper:

Place your tile with the clay slab under cold running water. The paper will begin to dissolve, and you can gently rub the remaining paper away using your fingers until you achieve a smooth texture. Do not apply too much pressure as this can distort the design.

Let the clay slab dry before cutting. After the clay slab is dry, cut and bake it as usual. Please note that the colors may slightly change during baking. We recommend using white or light-colored clay for the most accurate colors and best results.

**We do not recommend using embossing cutters as they may damage the image.**


After Baking:

5. You can sand your pieces as you normally would.

6. Sealing the Design:

We recommend sealing your finished piece with resin or other sealant. Sealing your piece will increase the durability of the transferred design.